Plenty going on recently but not much to blog about. I burried a cable across 30 metres of the neighbour’s garden to get electrics into the shed. A tough job but it needed doing. I also had a new ring fitted to the garage, so I’m all ready for the big machines – if they ever materialise!
In the shed we had the parts made to date sat together on the mill, when Bob suggested a group photo. So here you go.
From left to right: Conrod, Flywheels, sleeve drive crank, crank pin and 2 crankshaft.
Still some work to be done, but it won’t be long before we’re able to press the bottom end together. Now that will be progress! Time to really start thinking about how I’m going to make those cases.